Data still to be completed------(Home)
PRODUCT DATA of Cycom C69
MaterialCycom C69
Product TypePrepreg for laminates.
CAS Registry NumberModified epoxy/High modulus carbon fibres.
Name of ManufacturerCytec Fiberite Ltd
Abenbury Way, Wrexham Ind. Est., Wrexham LL13 9UZ, Clwyd, UK
+44 (0)1978 665 200
+44 (0)1978 665 222
www.cytec.com
EXPERIENCE IN PRACTICE
Development StatusCommercial Product
Cost RangeHigh
Lot ReproducibilityVery Good
Space ExperienceFair
PHYSICAL PROPERTIES
Specific Gravity1.63
THERMAL PROPERTIES
Thermal Expansion Coefficient-0.7 μstrain/°C
Remark: Long.; Trans. 30 x 10-6 /°C) Manufacturer’s Data
RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY
Temperature Range(space)-130°C to 180°C.
Test:Manufacturer’s Data
Outgassing(Avg data)TML = 0.6%, RML =0.3%, CVCM = 0.01%
Test:ECSS-Q-70-02
Humid Heat750 hours – no sizeable effect
Test:70°C – 95%
SPECIAL RECOMMENDATIONS
Special RecommendationsRecommended cure is one step at 140°C, pressure application (0.7 MPa), then 1 hour at 170°C. Post cure: 3 hours at 180°C. · The same resin can accommodate High Strength (HT-S) or type AS carbon fibres. · When continuous use temperature does not exceed 120°C, another prepreg with similar properties, Carboform 87, can be used.